Raritan PX3TS, Руководство пользователя

Страница: 528 / 842

Chapter 8: Using the Command Line Interface
504
Option Description
disable Disables the automatic retransfer.

<option3> is an integer number up to 180 in seconds.

<option4> is one of the options:
enable or disable.
Option Description
enable Automatic retransfer is performed only when
inlets are in phase.
disable Automatic retransfer is performed regardless of
the phase angle difference.

<name> is a string comprising up to 64 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
Example
The following command disables the front panel Manual Transfer button
and enables the Auto Retransfer feature.
config:# ts manualTransferButton disable autoRetransfer enable
Configuring Power Quality Parameters
All CLI commands used to configure power quality parameters begin
with
ts powerQualityParameters. Enter the configuration mode before
performing any of these commands. See
Entering Configuration Mode
(on page 500).
You can configure all of the following power quality parameters at a time
by combining all commands. See
Multi-Command Syntax (on page 635).
Set the Lower Critical voltage threshold:
config:# ts powerQualityParameters lowerCriticalVoltage <threshold_volts>
Set the Lower Warning voltage threshold:
config:# ts powerQualityParameters lowerWarningVoltage <threshold_volts>
Set the Upper Critical voltage threshold: