Raritan PX3TS, Руководство пользователя

Страница: 676 / 842

Chapter 9: Using SCP Commands
652
SCP example:
scp pdu-px2-030000-41270.bin
admin@192.168.87.50:/fwupdate
Windows PSCP command:
PSCP in Windows works in a similar way to the SCP.

pscp <firmware file> <user name>@<device
ip>:/fwupdate
Bulk Configuration via SCP
Like performing bulk configuration via the web interface, there are two
steps with the bulk configuration using the SCP commands:
a. Save a configuration from a source PX3TS.
b. Copy the configuration file to one or multiple destination PX3TS.
For detailed information on the bulk configuration requirements, see
Bulk Configuration
(on page 418).
To save the configuration via SCP:
1. Type the following SCP command and press Enter.
scp <user name>@<device ip>:/bulk_config.txt

<user name> is the "admin" or any user profile with the
administrator privileges.

<device ip> is the IP address of the PX3TS whose configuration
you want to save.
2. Type the user password when prompted.
3. The system saves the configuration from the PX3TS to a file named
"bulk_config.txt."
To copy the configuration via SCP:
1. Type the following SCP command and press Enter.
scp bulk_config.txt <user name>@<device
ip>:/bulk_restore

<user name> is the "admin" or any user profile with the
administrator privileges.

<device ip> is the IP address of the PX3TS whose configuration
you want to copy.
2. Type the user password when prompted.