Raritan PX3TS, Руководство пользователя

Страница: 421 / 842

Chapter 6: Using the Web Interface
397
b. Type the key and value.
c. Repeat the same steps to enter more arguments as needed.

To remove any existing argument, click adjacent to
it.
Note: Default arguments are overridden by the new arguments
specified with the "Start with Arguments" command or with any
Lua-script-related event rule. See
Manually Starting or Stopping a
Script
(on page 398) or
Start or Stop a Lua Script
(on page 365).
5. In the Source Code section, do one of the following. It is
recommended to leave the Enable Syntax Highlighting checkbox
selected unless you do not need different text colors to identify
diverse code syntaxes.

To write a Lua script, type the codes in the Source Code section.

To load an existing Lua script file, click Load Local File.

To use one of Raritan's Lua script examples, click Load Example.
Warning: The newly-loaded script will overwrite all existing codes in
the Source Code section. Therefore, do not load a new script if the
current script meets your needs.
6. If you chose to load a script or Raritan's example in the previous step,
its codes are then displayed in the Source Code section. Double
check the codes. If needed, modify the codes to meet your needs.
7. Click Create.