Raritan PX3TS, Руководство пользователя

Страница: 88 / 842

Chapter 4: Connecting External Equipment (Optional)
64
Combining Regular Asset Strips
Each tag port on the regular asset strips corresponds to a rack unit and
can be used to locate IT devices in a specific rack (or cabinet).
For each rack, you can attach asset strips up to 64U long, consisting of
one MASTER and multiple SLAVE asset strips.
The difference between the master and slave asset strips is that the
master asset strip has an RJ-45 connector while the slave does not.
The following diagram illustrates some asset strips. Note that Raritan
provides more types of asset strips than the diagram.
8U MASTER asset strip with 8 tag ports
8U SLAVE asset strip with 8 tag ports
5U "ending" SLAVE asset strip with 5 tag
ports
Note: Unlike general slave asset strips, which have one DIN connector
respectively on either end, the ending slave asset strip has one DIN
connector on only one end. An ending asset strip is installed at the end of
the asset strip assembly.
To assemble asset strips:
1. Connect a MASTER asset strip to an 8U SLAVE asset strip.

Plug the white male DIN connector of the slave strip into the
white female DIN connector of the master strip.