Raritan PX3TS, Руководство пользователя

Страница: 438 / 842

Chapter 6: Using the Web Interface
414
Warning: Do NOT power off the PX3TS during the update.
6. During the firmware update:

A progress bar appears on the web interface, indicating the
update status.

The front panel display shows the firmware upgrade message.
See Overview of the LCD Display (on page 98).

The outlet LEDs flash if the relay boards are being updated. If the
firmware update does not include the update of the relay board
firmware, outlet LEDs do NOT flash.

No users can successfully log in to the PX3TS.

Other users' operation, if any, is forced to suspend.
7. When the update is complete, the PX3TS resets, and the Login page
re-appears.

Other logged-in users are logged out when the firmware update
is complete.
Important: If you are using the PX3TS with an SNMP manager,
download its MIB again after the firmware update to ensure your
SNMP manager has the correct MIB for the latest release you are
using. See
Using SNMP (on page 451).
Alternatives:
To use a different method to update the firmware, refer to:

Firmware Update via SCP
(on page 650)

Bulk Configuration or Firmware Upgrade via DHCP/TFTP
(on
page 679)

Firmware Upgrade via USB
(on page 677)
Upgrade Guidelines for Existing Cascading Chains
You must obey the following guidelines when upgrading a chain.
Otherwise, a networking issue occurs.

Firmware version 3.3.10 or later is NOT compatible with pre-3.3.10
firmware versions in terms of the cascading feature so all devices in
the cascading chain must run version 3.3.10 or later.
Alternative: You can also choose to have the USB-cascading chain
run any pre-3.3.10 firmware. The disadvantage is that you will not
benefit from the latest software enhancements and features.