Raritan PX3TS, Руководство пользователя

Страница: 569 / 842

Chapter 8: Using the Command Line Interface
545
Customizing the Date and Time
If intending to manually configure the date and time, use the following
CLI commands to specify them.
Note: You shall set the time configuration method to "manual" prior to
customizing the date and time. See
Determining the Time Setup
Method
(on page 543).
Assign the date:
config:# time set date <yyyy-mm-dd>
Assign the time:
config:# time set time <hh:mm:ss>
Variables:
Variable Description
<yyyy-mm-dd> Type the date in the format of yyyy-mm-dd.
For example, type
2015-11-30 for November 30,
2015.
<hh:mm:ss> Type the time in the format of hh:mm:ss in the
24-hour format.
For example, type
13:50:20 for 1:50:20 pm.
Setting the Time Zone
The CLI has a list of time zones to configure the date and time for the
PX3TS.
config:# time zone
After a list of time zones is displayed, type the index number of the time
zone or press Enter to cancel.
Example
To set the time zone:
1. Type the time zone command as shown below and press Enter.
config:# time zone