Raritan PX3TS, Руководство пользователя

Страница: 319 / 842

Chapter 6: Using the Web Interface
295

sysName - the name assigned to the system

sysLocation - the location of the system
4. To configure SNMP notifications:
a. Select the Enable SNMP Notifications checkbox.
b. Select a notification type -- SNMPv2c Trap, SNMPv2c Inform,
SNMPv3 Trap, and SNMPv3 Inform.
c. Specify the SNMP notification destinations and enter necessary
information. For details, refer to:

SNMPv2c Notifications
(on page 452)

SNMPv3 Notifications
(on page 453)
Note: Any changes made to the 'SNMP Notifications' section on the
SNMP page will update the settings of the System SNMP Notification
Action, and vice versa. See
Available Actions (on page 350). To add
more than three SNMP destinations, you can create new SNMP
notification actions. See
Send an SNMP Notification
(on page 363).
5. You must download the SNMP MIB for your PX3TS to use with your
SNMP manager.
a. Click the Download MIBs title bar to show the download links.
b. Click the PDU2-MIB download link. See Downloading SNMP
MIB (on page 456).
6. Click Save.
Configuring SMTP Settings
The PX3TS can be configured to send alerts or event messages to a
specific administrator by email. See
Event Rules and Actions
(on page
329).
To send emails, you have to configure the SMTP settings and enter an IP
address for your SMTP server and a sender's email address.
If any email messages fail to be sent successfully, the failure event and
reason are available in the event log. See
Viewing or Clearing the Local
Event Log
(on page 412).
To set SMTP server settings:
1. Choose Device Settings > Network Services > SMTP Server.
2. Enter the information needed.