Raritan PX3TS, Руководство пользователя

Страница: 641 / 842

Chapter 8: Using the Command Line Interface
617

<option> is one of the options:
enable, disable or a numeric value.
Option Description
enable Enables the specified threshold for a specific
environmental sensor.
disable Disables the specified threshold for a specific
environmental sensor.
A numeric
value Sets a value for the specified threshold of a
specific environmental sensor and enables this
threshold at the same time.

<hy_value> is a numeric value that is assigned to the hysteresis for
the specified environmental sensor. See
"To De-assert" and
Deassertion Hysteresis (on page 766).

<as_value> is a number in samples that is assigned to the assertion
timeout for the specified environmental sensor. It ranges between 1
and 100. See
"To Assert" and Assertion Timeout
(on page 764).
Commands for Transfer Switch Sensors
A sensor threshold configuration command for transfer switch sensors
begins with
sensor ts. Currently only inlet phase sync angle settings can
be configured.
You can configure various inlet phase sync angle settings at a time by
combining multiple commands. See
Multi-Command Syntax
(on page
635).
Set the Upper Critical threshold for the inlet phase sync angle:
config:# sensor ts inletPhaseSyncAngle upperCritical <option>
Set the Upper Warning threshold for the inlet phase sync angle:
config:# sensor ts inletPhaseSyncAngle upperWarning <option>
Set the Lower Critical threshold for the inlet phase sync angle:
config:# sensor ts inletPhaseSyncAngle lowerCritical <option>
Set the Lower Warning threshold for the inlet phase sync angle: