Raritan PX3TS, Руководство пользователя

Страница: 158 / 842

Chapter 5: Using the PX3TS
134
Replacing a Fuse on 1U Models
This section introduces how to replace a fuse on a 1U model.
To order replacement fuses from Raritan, see
Technical Specifications
(on page 656) for correct fuse types.
Replacing a "blown" fuse can be performed while both inlets remain
connected to power.
To replace a fuse:
1. Identify the bad fuse by checking the fuse status using the LCD
display or web interface. See
Overcurrent Protector Information
(on page 102) or Checking Inlet Component Status.
2. Examine your PX3TS and the connected equipment to remove or
resolve the cause that results in the overload or short circuit. This
step is required, or you cannot proceed with the next step.
3. When you are sure the overload does NOT exist, you can force
transfer to the inlet with the good fuse to restore the current output
to outlets. See
Manual Transfer When an Alarm is Present (on
page 85).

In case the good fuse blows after manual transfer, stop and
repeat Step 2.
4. This step is recommended but not required -- disconnect the inlet
with the bad fuse from power.
5. Uninstall the bad fuse's holder from the PX3TS.
a. Turn the holder counterclockwise to loosen it.
b. Remove the holder.