Raritan PX3TS, Руководство пользователя

Страница: 43 / 842

Chapter 3: Initial Installation and Configuration
19
Configuring the PX3TS
You can initially configure the PX3TS via one of the following:

A TCP/IP network that supports DHCP

A mobile device with PDView installed

A computer physically connected to the PX3TS
Configuration via a DHCP-enabled network:
1. Connect the PX3TS to a DHCP IPv4 network. See
Connecting the
PX3TS to Your Network
(on page 15).
2. Retrieve the DHCP-assigned IPv4 address. Use the front panel LCD
display to retrieve it.

For PX3TS, see
IPv4 Address
(on page 103).

For PX3TS-iX7, see Device Info (on page 126).
3. Launch a web browser to configure the PX3TS. See
Login
(on page
140).
Configuration via a connected mobile device:
1. Download the PDView app to your mobile device. See
Connecting a
Mobile Device to PX3TS (on page 20).
2. Connect the mobile device to PX3TS via USB.
3. Launch PDView to configure the PX3TS.
Configuration via a connected computer:
1. Connect the PX3TS to a computer. See Connecting the PX3TS to a
Computer (on page 24).
2. Use the connected computer to configure the PX3TS via the
command line or web interface.

Command line interface: See
Initial Network Configuration via
CLI (on page 777).

Web interface: Launch the web browser on the computer, and
type the link-local IP address or
pdu.local to access the PX3TS.
See Login (on page 140).
Tip: To configure a number of PX3TS devices quickly, see Bulk
Configuration Methods
(on page 27).