Raritan PX3TS, Руководство пользователя

Страница: 44 / 842

Chapter 3: Initial Installation and Configuration
20
Connecting a Mobile Device to PX3TS
Raritan's PDView is a free app that turns your iOS or Android mobile
device into a local display for the PX3TS.
PDView is especially helpful when your PX3TS is not connected to the
network but you need to check the PX3TS status, retrieve its information,
or change its settings.
Requirements for using PDView:

The PX3TS is running firmware version 3.0.0 or later.

If using an Android device, it must support USB "On-The-Go" (OTG).

An appropriate USB cable is required. For information, refer to Step
2 below.
Step 1: Download and install PDView
1. Visit either Apple App or Google Play Store.

https://itunes.apple.com/app/raritan-pdview/id780382738

https://play.google.com/store/apps/details?id=com.raritan.andro
id.pdview
2. Install PDView.
Step 2: Connect the mobile device to PX3TS
1. Get an appropriate USB cable for your mobile device.

iOS: Use the regular USB cable shipped with your iOS mobile
device.

Android: Use an USB OTG adapter cable.
2. Connect the mobile device to the appropriate USB port on the PX3TS.

iOS: USB-A port.