Raritan PX3TS, Руководство пользователя

Страница: 141 / 842

Chapter 5: Using the PX3TS
117
Menu command Function
Alerts
Indicates all alerted sensors, if any. See Alerts (on page 118).
PDU
Shows the internal beeper's state, and, if it is on, the reason for turning
on.
Total active power and total active energy are also shown.
See PDU (on page 119).
Transfer Switch
Three types of information are shown.

Transfer switch status

Inlets data

Transfer log
OCPs
Shows a list of overcurrent protector information. See
OCPs
(on page
121).
Only PX3TS models with overcurrent protectors have this menu item.
Outlets
This menu command is only available on outlet-switching capable
models, such as PX3TS-5000 series.
Shows each outlet's information.
If your PX3TS supports outlet-switching, you can turn on, off or power
cycle an outlet.
See
Outlets
(on page 122).
Peripherals
Shows the information of connected Raritan environmental sensors or
actuators, such as the temperature sensor.
You can turn on or off a connected actuator with this command.
See Peripherals (on page 124).
Assets
Shows the asset management information if Raritan asset management
equipment is connected to your PX3TS. See
Assets (on page 125).
Device Info
Shows the PX3TS device's information, such as IP and MAC address. See
Device Info (on page 126).
Note: To return to the automatic mode, press . See
Automatic and
Manual Modes (on page 113).