Raritan PX3TS, Руководство пользователя

Страница: 696 / 842

Appendix C: Configuration or Firmware Upgrade with a USB Drive
672

If all outlets will share the same "on" or "off" setting, replace the
outlet numbers with the word "all".

Examples:

Turn on outlets 1 to 3, and 10, and turn off outlets 4 to 9.
switch_outlets=1,2,3:on;4-9:off;10:on

Turn on all outlets.
switch_outlets=all:on
tls_cert_file

Specify the filename of the wanted TLS server certificate. The
filename can contain a single placeholder ${SERIAL} that is replaced
with the serial number of the PX3TS.

This option should be used with tls_key_file listed below.

This option is NOT supported by bulk configuration or
backup/restore via DHCP/TFTP.
tls_key_file

Specify the filename of the wanted TLS server key. The filename can
contain a single placeholder ${SERIAL} that is replaced with the
serial number of the PX3TS.

This option should be used with tls_cert_file listed above.

This option is NOT supported by bulk configuration or
backup/restore via DHCP/TFTP.
execute_lua_script

Specify a Lua script file. For example:
execute_lua_script=my_script.lua

Script output will be recorded to a log file --
<BASENAME_OF_SCRIPT>.<SERIAL_NUMBER>.log. Note this log
file's size is limited on DHCP/TFTP.

A DHCP/TFTP-located script has a timeout of 60 seconds. After that
duration the script will be removed.

This feature can be used to manage LuaService, such as upload,
start, get output, and so on.

If you unplug the USB drive while the Lua script is still running, the
script will be removed.

An exit handler can be used but the execution time is limited to three
seconds. Note that this is not implemented on DHCP/TFTP yet.