Remote Control
R&S
®
ESR
566
User Manual 1175.7068.02 ─ 12
Example:
Definition:
HCOPy:PAGE:DIMensions:QUADrant[<N>]
Command:
HCOP:PAGE:DIM:QUAD2
This command refers to the quadrant 2.
Different numbering in remote control
For remote control, the suffix may differ from the number of the corresponding selec-
tion used in manual operation. SCPI prescribes that suffix counting starts with 1. Suffix
1 is the default state and used when no specific suffix is specified.
Some standards define a fixed numbering, starting with 0. If the numbering differs in
manual operation and remote control, it is indicated for the corresponding command.
Optional Mnemonics
Some command systems permit certain mnemonics to be inserted into the header or
omitted. These mnemonics are marked by square brackets in the description. The
instrument must recognize the long command to comply with the SCPI standard. Some
commands are considerably shortened by these optional mnemonics.
Example:
Definition:
HCOPy[:IMMediate]
Command:
HCOP:IMM
is equivalent to
HCOP
Optional mnemonics with numeric suffixes
Do not omit an optional mnemonic if it includes a numeric suffix that is relevant for the
effect of the command.
Example
:
Definition:
DISPlay[:WINDow<1...4>]:MAXimize <Boolean>
Command:
DISP:MAX ON
refers to window 1.
In order to refer to a window other than 1, you must include the optional
WINDow
parameter with the suffix for the required window.
DISP:WIND2:MAX ON
refers to window 2.
11.1.4.3
SCPI Parameters
Many commands are supplemented by a parameter or a list of parameters. The
parameters must be separated from the header by a "white space" (ASCII code 0 to 9,
11 to 32 decimal, e.g. blank).
The parameters required for each command and the allowed range of values are
specified in the command description.
Allowed parameters are:
Remote Control - Basics
