Remote Control
R&S
®
ESR
885
User Manual 1175.7068.02 ─ 12
Return values:
<Power>
Signal power over the marker bandwidth.
Example:
Activate the band power marker:
CALC:MARK:FUNC:BPOW:STAT ON
Select the density mode for the result:
CALC:MARK:FUNC:BPOW:MODE DENS
Query the result:
CALC:MARK:FUNC:BPOW:RES?
Response:
20dBm/Hz
Usage:
Query only
Manual operation:
See
See
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer:SPAN
<Span>
This command defines the bandwidth around the marker position.
Suffix:
<n>
.
irrelevant
<m>
irrelevant
Parameters:
<Span>
Numeric value that defines the span in Hz.
The maximum span depends on the marker position and
R&S
FSV model.
*RST:
5% of current span
Example:
CALC:MARK:FUNC:BPOW:SPAN 20
Manual operation:
See
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer[:STATe]
<State>
This command turns markers for band power measurements on and off.
If necessary, the command also turns on a marker. If a marker is already on, the cur-
rently active marker is used as the band power marker (all other marker functions for
this marker are deactivated).
For details see
"Performing Band Power Measurements"
Suffix:
<n>
.
irrelevant
<m>
irrelevant
Parameters:
<State>
ON | OFF
*RST:
OFF
Remote Commands in Spectrum Analyzer Mode
