Porsche Panamera 2018, Руководство пользователя

Страница: 96 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
C Coonnnneeccttiivviittyy
94
Connectivity
Establishing a data connection via
an external SIM card
An inserted external SIM card deactivates the
function of the embedded SIM (availability depend-
ent on country). Additional costs may be incurred
for the data connection (e.g. due to data roaming).
NOTICE
If you use a SIM card adapter, the SIM card may fall
out of the adapter due to vibrations and compo-
nents of the card may become stuck in the drive.
e
Do not use a SIM card adapter.
Fig. 54: Inserting and removing an external SIM card
b b
The glove compartment is open.
1. External SIM card B (Mini-SIM, dimensions
0.98 x 0.59 in. (25 x 15 mm)). The missing
corner must be pointing front left with the chip
facing down.
2. SIM card with PIN:
a. Enter the PIN for the external SIM card and
confirm with
OK .
b. Select Store PIN .
3. Confirm the prompt for establishing the data
connection.
The data connection is established.
4. To remove the external SIM card, press on the
inserted card and remove.
For information on the data connection settings:
>
Please see chapter "Device Manager" on
page 100.
Information
If a data connection cannot be established, check
the following:
– External SIM card has sufficient data volume
and is inserted correctly.
– External SIM card is not damaged and is work-
ing properly.
– APN settings (Internet access) are correct. The
APN settings can be checked by contacting the
network provider.
– Abroad: Data roaming is allowed on the exter-
nal SIM card and enabled in the PCM.
– The vehicle is in an area with sufficient network
reception (not a coverage blackspot).
– Restart the PCM if necessary.
Selecting access point for external SIM
card
If several access points are available, the mes-
sage
Several access points (APN) are avail-
able. Please choose one . A list of available
access points (APNs) is displayed.
1. Select the desired access point (APN).
2. If there is no access point configured, you
should contact the service provider to obtain
the APN settings. To configure the APN set-
tings, select or in the header (de-
pending on the connection status)
e
Options
e
Data connections
e
Configure APN .
Establishing data connection via
external WiFi hotspot
b b
There is no SIM card in the SIM card reader.
b b
Vehicles with embedded SIM (availability de-
pendent on country): PCM phone is switched
off.
>
Please see chapter "Changing phone set-
tings" on page 169.
1. Select or in the header (depending
on the connection status)
e
Options
e
WiFi
e
Search for WiFi hotspot
2. Select a WiFi hotspot (e.g. public hotspot or
the cellphone’s personal hotspot) and enter
WiFi access data in the PCM. Be aware of
upper and lower case when entering the data.
A connection is established to the external
WiFi hotspot.
Establishing data connection via
embedded SIM (availability de-
pendent on country)
b b
There is no SIM card in the SIM card reader.
The data connection is established immediately
when the ignition is switched on.
For information on the data connection settings: