Porsche Panamera 2018, Руководство пользователя

Страница: 252 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
VVeehhiiccllee sseettttiinnggss
250
Setting the tire type and tire size
Information
The options available depend on the model and tire
type. It is therefore possible that not all the options
shown here are available.
e
Before fitting tires and wheels with dimensions
that are not available for selection in the Tire
Pressure Monitoring System menu, the missing
information should be added. Visit an author-
ized Porsche dealer. Porsche recommends an
authorized Porsche dealer, as they have
trained technicians and the necessary parts
and tools.
e
Only use tires and wheels approved by
Porsche.
e
CAR
e
CONTROL
e
Vehicle
e
Tire
pressure monitoring
e
Tire selection
Selecting full load or partial load
e
CAR
e
CONTROL
e
Vehicle
e
Tire
pressure monitoring
e
Full load
Full load
Full load is activated.
Full load
Partial load is activated.
e
Adjust the tire pressures to the selected load
type.
Information
If the option Full load is not displayed, the speci-
fied tire pressures are valid for all vehicle load
states.
Selecting comfort pressure or standard
pressure
The tire pressures can be reduced to enhance
comfort.
With comfort pressure, the Tire Pressure Monitor-
ing System automatically uses lower required
pressures for tire pressure monitoring.
e
CAR
e
CONTROL
e
Vehicle
e
Tire
pressure monitoring
e
Comfort pressure
Comfort pressure
Comfort pressure is activated.
Comfort pressure
Standard pressure is activated.
e
Adjust tire pressures to comfort pressure or
standard pressure.
Teaching in the Tire Pressure Monitoring
System
After the tires have been changed, a wheel sensor
has been replaced or the tire settings have been
updated, the process for teaching the tires in the
Tire Pressure Monitoring System begins. The tire
pressure control system recognizes the wheels
and their installation position. The position and
pressure data is available as soon as the tire pres-
sure monitoring system has assigned the recog-
nized wheels to the correct wheel position.
During this process, the required pressures for
cold tires (68 °F (20 °C)) are displayed in the PCM
and a message appears on the instrument cluster.
The tire pressure warning light in the instru-
ment cluster remains lit until all the wheels have
been taught in.
>
Please see chapter "Warning and Information
Messages" on page 256.