Porsche Panamera 2018, Руководство пользователя

Страница: 286 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
W Whheeeellss aanndd TTiirreess
284
Caring for wheel attachment faces
Fig. 214: Wheel attachment faces
NOTICE
Risk of damage to the wheel and wheel attachment
face.
e
Wheel attachment face B on the brake disk and
on the wheel itself must not be lubricated.
e
Only the areas A may be greased. Lubricate
these faces with a very thin coating of
Optimoly
® TA. Contact an authorized Porsche
dealer. Do not use any other grease or
compound.
Caring for wheel bolts
e
Clean the wheel bolts before installation.
e
Wheel bolts must not be greased.
e
Replace damaged wheel bolts. Only use genu-
ine Porsche wheel bolts assigned especially for
this model or wheel bolts of similar quality that
have been manufactured according to Porsche
specifications and production requirements.
e
Tighten wheel bolts with a tightening tor-
que of 118 lb-ft. (160 Nm).
e
Do not use any force-actuated tools such as
impact screwdrivers.
Use security wheel bolts
Fig. 215: Adapter for security wheel bolts
The adapter for the security wheel bolts is located
in the tool box.
e
To loosen and tighten the wheel bolt with anti-
theft protection, the adapter must be used be-
tween the wheel bolt and the wheel bolt
wrench.
e
When positioning the adapter ensure that it en-
gages fully in the teeth of the wheel bolt.
Changing a wheel
Preparing the vehicle
1. Activate the transmission parking lock using
the P button on the selector lever.
2. Activate the electric parking brake.
3. Switch ignition off.
4. Secure the vehicle to prevent it from rolling
away, e.g. by placing wheel blocks at the
wheels on the opposite side.
5. Slightly loosen the wheel bolts or wheel nuts on
the wheel to be changed.
WARNING
Control operation of the
leveling system
A vehicle on which the leveling system is activated
can move unexpectedly or tip or fall off lifting
equipment, e.g. a jack or lifting platform. This can
cause serious injuries and damage.
e
Manually set normal level and switch off the
leveling system before lifting the vehicle.
>
Please see chapter "Vehicle settings" on
page 248.
6. Raise the vehicle only at the specified jacking
points.
>
Please see chapter "Jack and Lifting Plat-
form" on page 137.
7. Raise the vehicle until the wheel lifts off the
ground.