Porsche Panamera 2018, Руководство пользователя

Страница: 88 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
C Chhaarrggiinngg
86
>
Please see chapter "Display of the charge and
connection status on the vehicle charge port"
on page 86.
Information
– If the vehicle plug is inserted when you lock the
vehicle, the vehicle plug remains locked.
– The ignition can be switched on after the
charging process starts.
– If the vehicle key or operating device is turned
to ignition lock position 2 during the charging
process, the charging process is interrupted. If
the vehicle plug is not removed, charging re-
sumes after approx. 20 seconds.
– If the charging timer function is activated, the
charging timer controls when the charging
process starts and the charging process may
not start immediately after you insert and lock
the vehicle plug.
Finishing the charging process and
removing the vehicle plug from the
vehicle charge port
1. Unlock the vehicle.
2. Press button C on the vehicle charge port.
The vehicle plug is unlocked. If a charging
process was started, it will be stopped.
3. Press the release button ( arrow ) on the vehicle
plug and pull the vehicle plug from the vehicle
charge port within approx. 20 seconds.
4. Disconnect the vehicle charging cable from the
power supply and store in a safe place.
5. Close the charge port door.
Information
– Observe the specified sequence for charging
the high-voltage battery.
– End the charging process before disconnect-
ing the vehicle cable from the electrical socket.
– Observe the safety instructions for charging
the high-voltage battery.
Display of the charge and connec-
tion status on the vehicle charge
port
The light indicator B shows the charge state of the
high-voltage battery and the light indicator on but-
ton
C shows the connection status of the vehicle
plug.
B C Meaning
off off Vehicle plug not inserted or
no connection to the power
grid established.
or
Vehicle plug inserted: Ve-
hicle in idle state. To detect
the current connection and
charge status: Press the
or button on the vehicle
key.
off flash-
es Vehicle plug inserted and
not locked (e.g. incorrect
voltage at vehicle plug).
B C Meaning
lights
up
lights
up Vehicle plug inserted and
locked. Connection to the
power grid established (e.
g. timed charging).
flash-
es
lights
up Vehicle plug inserted and
locked. The high-voltage
battery is being charged.
The lighting duration corre-
sponds to the current
charge state of the high-
voltage battery.
lights
up
lights
up Vehicle plug inserted and
locked. The charging proc-
ess is finished.
lights
up
lights
up An error occurred when
charging the high-voltage
battery.
If the charging process was not started:
e
Check that the vehicle plug is inserted
correctly.
e
Refer to the separate instructions for the Por-
sche charging equipment and instructions of
the vehicle charging cable used.
e
Remove and insert the vehicle plugs again.
Using the charge timer function
When the departure timer is active, the high-volt-
age battery is fully charged at a programmed de-
parture time. The vehicle interior can also be
precooled/heated.