Porsche Panamera 2018, Руководство пользователя

Страница: 34 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A Addaappttiivvee C Crruuiissee C Coonnttrrooll ((A AC CC C))
32
Exceptions
WARNING
Adaptive cruise control
(ACC) system limits
e
The following exceptions for ACC must also be
considered when using Porsche InnoDrive:
– For safety reasons, ACC must not be used
under unfavorable road conditions and/or poor
weather conditions (e.g. snow-covered or slip-
pery road surface, fog, stone chippings, heavy
rain or aquaplaning).
– Switch off ACC temporarily when driving on
turn-off lanes, highway exits or in areas with
roadworks. This will prevent the vehicle from
accelerating to the set speed in such
situations.
– ACC does not brake automatically when the
foot is placed on the accelerator pedal. Placing
the foot on the accelerator pedal may override
the cruise and distance control.
– When approaching stationary vehicles, for ex-
ample at the end of a traffic jam, ACC only op-
erates to a restricted extent.
– ACC does not react to people, animals, cross-
ing or oncoming objects.
– Reflective objects such as crash barriers or
tunnel entrances, heavy rain or ice formation
may impair functionality of the radar sensors. A
message indicating that ACC is not available
appears on the instrument cluster.
>
Please see chapter "Warning and Information
Messages" on page 256.
Operating principle of adaptive
cruise control (ACC)
No vehicles detected ahead – open road
Adaptive cruise control behaves like a speed con-
trol system. The desired speed set is kept
constant.
Vehicle detected in front – follow mode
If another vehicle that is traveling slower than the
selected speed is detected ahead in the same
lane, adaptive cruise control automatically main-
tains a set distance.
If the vehicle in front stops, adaptive cruise control
slows the vehicle and brings it to a stop, provided
that this is possible within the system's control
parameters.
Adaptive cruise control actively keeps the vehicle
in a stationary position.
When the vehicle in front drives off, the automatic
speed and distance control can start again.
Override
The speed of the vehicle can be increased at any
time by pressing the accelerator pedal.
If the speed set by adaptive cruise control vehicle
is exceeded by pressing on the accelerator pedal,
the adaptive cruise control is deactivated.
A message indicating that ACC is in passive mode
appears on the instrument cluster. The desired
speed setting is retained.
After the accelerator pedal is released, adaptive
cruise control maintains the desired speed on an
open road, or the appropriate distance when trav-
eling behind another vehicle.
For information on ACC operating states:
>
Please see chapter "Operating states of adap-
tive cruise control (ACC) when active" on
page 33.
Operating adaptive cruise control
(ACC)
Fig. 3: Operating adaptive cruise control
R Switching ACC on/off
1 Set/increase the desired speed
2 Reduce the desired speed
3 Interrupt (CANCEL)
4 Continue (RESUME)
Information
The driver can intervene at any time by pressing
the brake or the accelerator pedal.
Adaptive cruise control (ACC)
display
All important information, messages and warnings
for adaptive cruise control are displayed in the