Porsche Panamera 2018, Руководство пользователя

Страница: 288 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
W Wiinnddoow wss
286
Windows
WARNING
Opening and closing
windows
When opening or closing the windows, particularly
in automatic mode, body parts can become trap-
ped between the moving window and stationary
vehicle parts.
e
When opening and closing the windows, make
sure that no parts of the body become trapped
between windows and stationary vehicle parts.
e
Always switch off the ignition when leaving the
vehicle. People who are unfamiliar with the ve-
hicle could injure themselves with the power
windows.
e
In the event of danger: release the power win-
dow button immediately.
e
Do not leave children in the vehicle unattended.
WARNING
Closing a window
manually
If automatic mode was deactivated after a window
was blocked, the window will close with its full
force when closed manually.
e
Ensure that no one can be pinched or crushed
when the windows close.
Information
If a window is blocked by an obstruction when
closing, the window stops and opens again a few
centimeters.
If the window is blocked a second time within
around 10 seconds, the automatic mechanism for
this window is locked. The window can be closed
manually. Automatic mode is enabled again once
the window has been completely shut once in
manual mode.
Opening and closing the windows
b b
Ignition is switched on.
– or –
b b
Ignition switched off, but not for more than
10 minutes.
b b
The driver's or passenger's door has not yet
been opened.
Fig. 218: Buttons for driver's door power window
A Power window button, front, driver side
B Power window button, front, passenger side
C Power window button, rear, driver side
D Power window button, rear, passenger side
The rocker switches feature a two-stage func-
tion . When the buttons are used, both stages can
be clearly felt due to a resistance when pushed or
pulled.
Stage one – manual operation
e
Press or pull the relevant rocker switch until the
required position is reached.
The process stops when the button is released.
Stage two – automatic operation
e
Briefly push or pull the relevant rocker switch
all the way to the second setting.
The window opens or closes automatically to
the final position.
e
Pressing the button again stops the window in
the required position.
Storing final position of windows
The final positions of the windows are lost after the
battery is disconnected and reconnected. Win-
dows automatic mode is not operative.
Perform the following steps for all windows:
1.
Close the window completely once by pulling
the rocker switch to the second setting.
2. When the window is completely closed, briefly
pull the rocker switch to the second setting
again.
3. Completely open the window once by pressing
the switch.