Porsche Panamera 2018, Руководство пользователя

Страница: 237 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
TToow wiinngg
235
Using the towing hook
Fig. 193: Towing hook
Attaching the towing hook
The towing hook is stored in the tool box.
>
Please see chapter "Luggage compartment" on
page 152.
1. Press the plastic cover at the lower edge of the
bumper until it is released, or carefully release
the plastic cover using a suitable object (e.g.
screwdriver).
2. Pull the plastic cover out of the bumper and let
it hang by the cord.
3. Screw in towing hook A counter-clockwise as
far as it will go (left-hand thread) and tighten
hand-tight.
Removing the towing hook
1. Unscrew the towing hook A (turn clockwise,
left-hand thread).
2. Insert the plastic cover at the lower edge of the
opening.
3. Fold the plastic cover up and press on its upper
edge to engage it in the bumper.
4. Store the towing hook in the tool box.
Using flat bed
Pulling vehicle onto flat bed
Fig. 194: Pulling vehicle onto flat bed
1. Position wooden ramps at the base of the flat
bed to reduce the angle of the pull.
2. Reel in the hoist cable and check the underside
of the vehicle for any interference.
Tying down vehicle on flat bed
Fig. 195: Tying down vehicle on flat bed
1. Carefully feed towing straps through the open-
ing in the rear wheels. Make sure metal parts of
straps do not damage rim. Make sure the strap
is flat over the rim bead. Make sure brake
backing plate is not damaged.
2. Secure straps to rear of flat bed.
3. Reel in hoist cable only far enough to tension
tie-down straps.
4. Carefully feed towing straps through the open-
ing in the
front wheels . Make sure metal parts
of straps do not damage rim. Make sure the
strap is flat over the rim bead. Make sure brake
backing plate is not damaged.
5. Secure straps to front of flat bed.
6. Release tension on hoist cable, but do not
disconnect.