Porsche Panamera 2018, Руководство пользователя

Страница: 77 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
C Caarr C Caarree
75
Metal particles (e.g. brass or copper in brake dust)
must not remain too long on alloy wheels. Contact
corrosion can cause pitting.
Cleaners with an oxide-removing effect or incor-
rect pH value, as are commonly used for other
metals, as well as mechanical equipment and
products, will damage the surface and are there-
fore unsuitable.
e
Only use acid-free cleaners for alloy wheels (pH
value between 4 and 10). Products with the in-
correct pH value can destroy the surface of the
wheels.
e
If possible, wash the wheels every two weeks
with a sponge or washing brush. If the wheels
are exposed to grit or industrial dust, weekly
cleaning is necessary.
>
Please see chapter "Washing your vehicle" on
page 72.
Cleaning door, roof, lid, and win-
dow seals
NOTICE
The lubricant coating on the inner door seals may
be damaged by unsuitable cleaning agents and
care products.
e
Do not use chemical cleaning agents or
solvents.
e
Do not use care products.
To ensure proper cleaning of your vehicle, please
observe the following:
e
Wash dirt (e.g. abrasion, dust, road salt and
grit) from all seals regularly using warm soapy
water.
e
If there is a risk of frost, protect the outer door
seals and lid and flap seals from freezing using
a suitable care product.
Leather care
NOTICE
The leather may become damaged by the use of
unsuitable cleaning agents and care products, and
by inappropriate treatment.
e
Do not use aggressive cleaners or hard clean-
ing objects.
e
Make sure that perforated leather does not get
wet on its reverse side.
e
Remove water drops from the leather
immediately.
To ensure proper cleaning and care of your ve-
hicle, please observe the following:
e
Clean all types of leather regularly to remove
fine dust using a soft, white woolen cloth, or a
commercially available microfiber cloth.
e
Remove heavy soiling ( not water or moisture
stains) with a leather cleaning agent. Read the
instructions for use on the containers.
e
Treat cleaned leather only with a leather care
product.
Cleaning seats with seat ventilation
Rain water or moisture can stain the perforated
leather of the seats.
Removing water and moisture stains.
b b
Heated seat and seat ventilation is switched
off.
b b
Ensure there is no direct sunlight.
1. Blot the entire seat and backrest surface using
a clean, absorbent sponge and distilled water.
Make sure that perforated leather does not get
wet on its reverse side.
2. Allow the seat covering to dry completely at
room temperature out of direct sunlight. Do not
switch on the heated seat and seat ventilation
to do this.
3. Once dry, wipe the seat covering with a dry, lint-
free cloth.
Cleaning carpet, floor mats
WARNING
Obstructed pedals
Unsuitable floor mats or floor mats that are not
properly secured can restrict the movement of the
pedals or interfere with actuation of the pedals.
e
Secure the floor mats properly – do not lay
them loosely.
To ensure proper cleaning of your vehicle, please
observe the following:
e
Clean using a vacuum cleaner or a brush that is
not too soft.
e
Remove heavy dirt and stains using a stain
remover.
To protect carpets, the Porsche range of acces-
sories includes the correct size of floor mats with
the appropriate fastening.
Cleaning airbag covers
DANGER
Improper cleaning
Unsuitable cleaning and care agents may pene-
trate the airbag system and improper handling
may damage the airbag system. The airbag sys-
tem may not deploy properly in the event of an
accident.
e
Do not make any modifications whatsoever to
individual components, such as the covers of
the steering wheel, the dashboard, front seats