Porsche Panamera 2018, Руководство пользователя

Страница: 287 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
W Whheeeellss aanndd TTiirreess
285
Performing the change
Fig. 216: Screw in one assembly aid on vehicles without
PCCB
Fig. 217: Screw in two assembly aids on vehicles with
PCCB
1. For vehicles with PCCB: Remove one wheel bolt
and screw in an assembly aid.
– or –
1. For vehicles with PCCB: Remove two wheel
bolts and screw in two assembly aids.
NOTICE
The brake disks can become damaged in the case
of improper wheel change, especially on vehicles
with PCCB.
e
When changing a wheel, screw in the assembly
aids.
2. Remove the remaining wheel bolts.
>
Please see chapter "Caring for wheel bolts"
on page 284.
3. Remove the wheel.
>
Please see chapter "Caring for wheel at-
tachment faces" on page 284.
4. Fit a new wheel.
5. Insert wheel bolts and tighten in diagonally op-
posite sequence.
6. Remove assembly aids and screw in remaining
wheel bolts. Initially tighten bolts only slightly in
a diagonally opposite sequence so that the
wheel is centered.
7. Inflate the tires if necessary.
8. Lower the vehicle fully and remove the jack.
9. Tighten the wheel bolts in diagonally opposite
sequence. Do not use any force-actuated tools
such as impact screwdrivers.
10.Immediately after changing a wheel, use a
torque wrench to check the specified
tightening torque (118 lb-ft (160 Nm)) of
the wheel bolts.
11. The current settings for the Tire Pressure
Monitoring System (TPMS) are displayed.
>
Please see chapter "Vehicle settings" on
page 248.