Porsche Panamera 2018, Руководство пользователя

Страница: 292 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
W Wiinnddsshhiieelldd w wiippeerrss
290
4 – Windshield wipers one-touch
operation
e
Press wiper lever briefly downward.
The windshield wipers carry out one wiping
cycle.
e
Press wiper lever down and hold.
The windshield wipers wipe fast.
5 – Windshield wiper and washer system
e
Pull wiper lever toward the steering wheel.
The washer system wipes and sprays while the
lever is pulled towards the steering wheel.
When the wiper lever is released, a few drying
wipes are performed. After every 10 wipes of
the windshield, the headlights are cleaned
automatically.
Information
The quantity of water sprayed depends on the
speed driven and on how long the wiper lever is
actuated.
Information
e
If windshield is very dirty, repeat the cleaning
process.
e
Persistent dirt (e.g. insect remains) should be
removed regularly.
For information on car care:
>
Please see chapter "Car Care" on page 72.
Windshield wiper blades in perfect condition are
vital for ensuring a clear view.
>
Please see chapter "Caring for windshield
wipers" on page 74.
Adjusting rain sensor operation
When the rain sensor is activated, the amount of
rain on the windshield is measured. The wiper
speed is automatically adjusted accordingly.
At a driving speed below approx. 2.5 mph (4 km/
h), rain sensor operation is activated automatically
when the windshield wipers are switched on (wiper
lever in position
2 ). If a speed of approx. 7 mph (12
km/h) is exceeded, the system switches to the
preselected wiper speed.
Information
– If the wiper lever is already in position 1 when
the ignition is switched on, the rain sensor is
activated when the driving speed exceeds ap-
prox. 2.5 mph (4 km/h).
– If the wiper lever is already in position 2 or 3
when the ignition is switched on, the windshield
wipers remain switched off until the wiper lever
is actuated.
Adjusting rain sensor sensitivity manually
High sensitivity
e
Press switch Bupward .
The setting is confirmed by one wipe of the
windshield.
Low sensitivity
e
Press switch Bdownward .
Actuating the headlight washer
system
Fig. 224: Button C for headlight washer system
b b
Low beam or high beam is activated.
e
Press button C under the wiper lever.
Information
After every 10 wipes of the windshield, the head-
lights are cleaned automatically. The wipe count
starts again from zero when the low beam is
switched off.
Operating the rear wiper
Fig. 225: Button A for rear wiper and light indicator D