Porsche Panamera 2018, Руководство пользователя

Страница: 47 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A Addaappttiivvee ccrruuiissee ccoonnttrrooll ((A AC CC C)) w wiitthh P Poorrsscchhee IInnnnooD Drriivvee ((P PIID D))
45
Changing the desired speed
b b
Porsche InnoDrive active.
In AUTO mode, Porsche InnoDrive automatically
selects the speed specified through the detected
speed limit. Using
Speed + or Speed – , the driver
can however increase or decrease the speed indi-
vidually based on the detected speed limit, e.g.
70 mph (120 km/h) (speed limit) + 3 mph (5 km/h)
(deviation) = 73 mph (125 km/h) (desired speed).
Increase desired speed (Speed +)
The desired speed can be increased beyond the
set maximum speed.
e
Briefly press the control lever on the steering
wheel forwards (position
1 ) (increments of 1
mph (1 km/h)) or keep it pressed (increments
of 5 mph (10 km/h)).
The red bar
B and the status display A indicate
the set desired speed.
Reduce desired speed (Speed –)
e
Briefly pull the control lever toward the steering
wheel (position
2 ) (increments of 1 mph (1 km/
h)) or keep it pulled (increments of 5 mph (10
km/h)).
The red bar
B and the status display A indicate
the set desired speed.
Setting the desired speed setting
(RESUME)
e
When changing the speed limit, press the con-
trol lever on the steering wheel up (position
4 ,
RESUME ).
The set deviation will be transferred to the next
speed limit.
Information
In the event of a speed limit change, the new speed
limit will always be set, even if a desired speed has
already been set.
Setting the desired distance
>
Please see chapter "Setting the desired dis-
tance" on page 34.
Automatic braking to a standstill
and driving off again
>
Please see chapter "Automatic braking until the
vehicle comes to a standstill" on page 35.
>
Please see chapter "Moving off again" on
page 35.
Interrupting and resuming speed
and distance control
Interrupting speed and distance control
– CANCEL
e
Press the brake pedal.
– or –
Press the control lever on the steering wheel
down (position
3 , CANCEL ).
Porsche InnoDrive is ready.
The desired speed and distance settings are
retained.
The status display
A changes from red to gray.
Information
During driving, Porsche InnoDrive cannot be acti-
vated while the brake is pressed.
Resuming speed and distance control –
RESUME
Resuming AUTO mode:
e
Press up the control lever on the steering wheel
(setting
4 , RESUME ).
The status display A changes from gray to red.
Resuming desired speed:
e
Press the control lever on the steering wheel up
again (position
4 , RESUME ).
Porsche InnoDrive regulates the speed to the
set desired speed.
Warning messages, exceptions,
and traffic situations where detec-
tion is unreliable
>
Please see chapter "ACC warning messages"
on page 36.
>
Please see chapter "Exceptional conditions
with adaptive cruise control (ACC)" on page 36.
>
Please see chapter "Active safety - Porsche
Active Safe (PAS)" on page 37.
Example of Porsche InnoDrive
control
Fig. 14: Example of Porsche InnoDrive control