Pacific Power Source LMX Series, Руководство по эксплуатации

Страница: 441 / 463

LMX SERIES™ OPERATION MANUAL
SECTION 12: Warnings & Error Messages
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual Page 441 of 463
Error Source Code Category Error Message Possible Cause Resolution
Front panel 75 Error IP address conflict. May
be duplicated.
Duplicate IP detected Check IP or renew lease
Front panel 76 Error Invalid filename. File name invalid Check file name
Front panel 77 Error External memory storage
is not available.
Can't find external
memory device selected.
External storage device
selected may have been
removed
Re-insert external
memory device or select
different memory type
Front panel 78 Error Data logger rate not
allowed.
Data logging rate set is
invalid
Adjust logging rate
setting
Front panel 79 Event Data logger is running Trying to change
configuration settings
while data logging is in
progress. Stop data
logger function before
changing configuration
Stop data logger function
before changing
configuration
Front panel 80 Error Data logger execution
error.
Error during data logging Stop data logger function
Front panel 83 Event Internal error: File system
partition blocked.
Front panel 84 Event Unable to change form
while output is enabled.
Trying to change phase
mode while output is ON.
Phase mode (FORM)
cannot be changed while
output is ON
Turn output OFF first,
then change FORM
Front panel 85 Error Unable to clear one or
more fault.
Could not clear one or
more faults when
requested
Try recycling power. If
error persists, contact
customer service
Front panel 89 Error Digital I/O interface
conflict: Remote inhibit is
active.
Conflict between front
panel and Remote Inhibit
input level
Resolve conflict. Check
input to Remote Inhibit
Front panel 90 Error Digital I/O interface
conflict: Remote enable is
active.
Conflict between front
panel and Remote
Enable input level
Resolve conflict. Check
input to Remote Enable
Front panel 91 Error Internal error: Unknown
phase mode.
Selected Phase Mode
(FORM) is unknown
Try recycling power. If
error persists, contact
customer service
Front panel 95 Error Digital I/Os interface
conflict: Serial interface
flow control is active.
RS232 or USB interface
error
Check RS232 or USB
settings
Front panel 96 Error Data logger storage error. Error saving
measurement data to
selecting memory device.
Memory device may have
been removed
Check for Memory device
presence
Front panel 97 Error Output enable in
progress.
Waiting to turn output
off. Changing from
Output ON to Output OFF
state
Wait for power stages
and inverters to fully
engage
Front panel 98 Error DC Voltage not allowed in
"AC mode".
Setting conflict. Setting
does not match mode
Check setting
Front panel 99 Error AC Voltage not allowed in
"DC mode".
Setting conflict. Setting
does not match mode
Check setting
Front panel 100 Error DC voltage set point
cannot change due to
user limit.
Setting conflict. Setting
outside of User Limits
Check setting