Pacific Power Source LMX Series, Руководство по эксплуатации

Страница: 296 / 463

LMX SERIES™ OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual Page 296 of 463
Command Syntax [SOURce:]STEP:LOAD
Description This command converts the step transient definition to the power
source’s regular transient segment format and loads it in the
controller real-time memory for execution.
Parameters None
Parameter Format n/a
Example STEP RUN
Query Format
[SOURce:]STEP:LOAD?
Description Query format returns a 1 if the step transient load operation was
successful, otherwise returns 0.
Returned Data Format <nr1>
Return values respresent:
0 Load Failed
1 Load completed
Query Example STEP?
1
Query Syntax [SOURce:]STEP:PROGress?
>>> Alias for PROGram:TRANsient:PROGress command. <<<
Description This query command returns the status of the step being executed.
Parameters None
Parameter Format n/a
Description Query returns the step transient execution state as either RUN, STOP,
PAUS, STEP or REST
Returned Data Format <cr>
The response is a comma-separated value string representing:
PROGRESS, CURRENT SEGMENT PROGRESS, CURRENT SEGMENT, CURRENT
SEGMENT TIME, TOTAL TIME, TOTAL SEGMENTS, REPEAT TIME COUNTER
Query Example STEP:PROG?
1, 45, 2, 1.2300, 2.0000, 4, 5
Query Syntax [SOURce:]STEP:CHECK?
Description This query command returns the result of a check on the
programmined step parameters to determine if they are ok to run.
Parameters None
Parameter Format n/a
Description Query returns result of STEP parameters integrity check
Returned Data Format <cr>
The response is either OK or if not, a string containing the error.
Query Example STEP:PROG?
OK