Pacific Power Source LMX Series, Руководство по эксплуатации

Страница: 219 / 463

LMX SERIES™ OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual Page 219 of 463
8.4.9 Harmonic Measurements Commands
Harmonic Measurements commands may be used to retrieve harmonic analysis data for voltage and
current. These measurements are returned using the SPECTrum commands.
Query Format MEASure:SPECTrum:VOLTage#[:MAGnitude]?
Description Returns harmonics spectrum for voltage on selected phase #. # = 1, 2
or 3. Returns a data set of 51, <nr2> type numbers, comma delimited.
The 1 st element is the magnitude of the fundamental, for reference.
The 2
nd
element is the 2
nd
harmonic, etc. Values represent % of
fundamental (relative).
Only a single spectrum may be queried in a command.
Returned Data Format <nr2>, <nr2>, <nr2>,……, <nr2>
Query Example MEAS:SPECT:VOLT1?
100.000, 0.001, 0.3…., 0.000
Query Format
MEASure:SPECTrum:VLL#[:MAGnitude]?
Description Returns harmonics spectrum for three phase Line to Line voltage on
selected phase #. # = 1, 2 or 3 (1 = Vab, 2 = Vbc, 3 = Vac). Returns a
VLL data set of 51, <nr2> type numbers, comma delimited. The 1 st
element is the magnitude of the fundamental, for reference. The 2 nd
element is the 2 nd harmonic, etc. Values represent % of fundamental
(relative).
Only a single spectrum may be queried in a command.
Returned Data Format <nr2>, <nr2>, <nr2>,……, <nr2>
Query Example MEAS:SPECT:VLL1?
207.000, 0.001, 0.3…., 0.000
Query Format MEASure:SPECTrum:VLL#:ABSolute?
Description Returns absolute harmonics spectrum for three phase Line to Line
voltage on selected phase #. # = 1, 2 or 3 (1 = Vab, 2 = Vbc, 3 = Vac).
Returns a VLL data set of 51, <nr2> type numbers, comma delimited.
The 1 st element is the magnitude of the fundamental, for reference.
The 2 nd element is the 2 nd harmonic, etc. Values represent % of
fundamental (relative).
Only a single spectrum may be queried in a command.
Returned Data Format <nr2>, <nr2>, <nr2>,……, <nr2>
Query Example MEAS:SPECT:VLL1:ABS?
207.000, 0.001, 0.3…., 0.000