LMX SERIES™ OPERATION MANUAL
SECTION 8:
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Page 288 of 463
Command Syntax
[SOURce:]STEP:VOLTage[:AC]:FINal# < nr2 >, <cr>
[SOURce:]STEP:VOLTage[:AC]:FINal#
Voltage phase A, OPT: Voltage phase B, OPT: Voltage phase C, OPT
Description
This command sets the final STEP voltage for selected phase # or for
all phases if phase reference is omitted.
Parameters
Voltage , < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
Parameter Format
<nr2>, <cr>
Example
STEP:VOLT:FIN 180.00, SAT
Query Format
[SOURce:]STEP:VOLTage[:AC]:FINal#?
Returned Data Format
<nr2> | <nr2>,<nr2>,<nr2>
Query Example
STEP:VOLT:FIN?
180.000,180.000,180.000
Query Syntax
[SOURce:]STEP:VOLTage[:AC]:FINal#:MINimum?
Description
This command returns the minimum permissible set value for the
final STEP voltage for selected phase # or for all phases if phase
reference is omitted
Returned Data Format
<nr2>
Query Example
STEP:VOLT:FIN1:MIN?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
Query Syntax
[SOURce:]STEP:VOLTage[:AC]:FINal#:MAXimum?
Description
This command returns the maximum permissible set value for the
final STEP voltage for selected phase # or for all phases if phase
reference is omitted
Returned Data Format
<nr2>
Query Example
STEP:VOLT:FIN1:MAX?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
Query Syntax
[SOURce:]STEP:VOLTage[:AC]:FINal#:DEFault?
Description
This command returns the default set value for the final STEP voltage
for selected phase # or for all phases if phase reference is omitted
Returned Data Format
<nr2>
Query Example
STEP:VOLT:FIN1:DEF?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
