LMX SERIES™ OPERATION MANUAL
SECTION 7: Auxiliary I/O
Error! Reference source not found.
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Page 195 of 463
7.12
Front Panel Operation of AUX I/O Functions
The auxiliary I/O functions can be configured and programmed from the front panel using
the SYSTEM menu (Press SYST key to left of the LCD screen). This section describes the
available AUX I/O program screens and parameters for each function.
7.12.1
Accessing AUX I/O Screens.
From the SYSTEM MENU, scroll to the INTERFACE entry and press the shuttle or ENTER key
as indicated below. If the Interface selection is not visible, press the “
More”
soft key to
display the second System Menu screen.
Next, scroll to the “Digital & Analog I/Os” entry at the bottom of the INTERFACE SETUP
screen.
This will display a list of available Auxiliary I/O functions and features. To display the second
of two DIGITAL & ANALOG I/Os screens, use the “
More”
soft key.
To select the desired function, use the knob to scroll up or down. Once selected, press the
Shuttle know or ENTER key to open the relevant I/O control screen.
Each screen is covered in the following sections in more detail.
