Pacific Power Source LMX Series, Руководство по эксплуатации

Страница: 298 / 463

LMX SERIES™ OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual Page 298 of 463
8.7.12 PULSE Transient Commands
The command in this section control PULSE transients. Some of these commands have the
option to specify NORmal or SATurate.
SATurate mode:
If a dwell time setting is out of limits, the dwell time will saturate to the
limit min/max and it will not trip an error.
NORmal mode : If a dwell time setting is out of limits, an error will be generated and
the dwell time setting will not be modified.
Command Syntax
[SOURce:]PULSe:COUNT <nr1>, <opt>
Description This command sets the pulse count or the number of pulses to
execute. Minimum time set value allowed is 1.
Parameters Count, Option: < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
Parameter Format <nr1>, <cr>
Example PULS:COUNT 5
Query Format [SOURce:]PULSe:COUNT?
Returned Data Format <nr1>
Query Example PULS:COUNT?
5.0000
Query Syntax [SOURce:]PULSe:COUNT:MINimum?
Description This command returns the minimum permissible set value for the
PULSE count.
Returned Data Format <nr1>
Query Example PULS:COUNT:MIN?
0
Query Syntax [SOURce:]PULSe:COUNT:MAXimum?
Description This command returns the maximum permissible set value for the
PULSE count.
Returned Data Format <nr1>
Query Example PULS:COUNT:MAX?
65535
Query Syntax [SOURce:]PULSe:COUNT:DEFault?
Description This command returns the default set value for the PULSE count.
Returned Data Format <nr1>
Query Example PULS:COUNT:DEF?
1