Nord Drivesystems SK 510P, Руководство с инструкциями по установке

Страница: 84 / 256

NORDAC PRO (SK 500P) – Manual with installation instructions
84 BU 0600 en-3221
P002 Display factor S
Setting range 0.01 … 9999.99
Factory setting { 1 }
Description The selected operating value in parameter P001
“Select display value”
is multiplied by
the scaling factor in P000 and displayed in the
“Operating para. display”
.
It is therefore possible to display system-specific operating values e.g. throughput
quantity.
P003 Supervisor code
Setting range 0 … 9999
Factory setting { 1 }
Description The scope of the visible parameters can be influenced by setting the supervisor code.
Note Display via NORDCON
If parameterisation is carried out with the NORDCON software, the settings 2 ... 9999
the settings are as for the 0 setting.
Setting values
Value Meaning
0 Supervisor mode Off The supervisor parameters are not visible.
1 Supervisor mode On
All parameters are visible.
2 Supervisor mode Off
Only the menu group 0 (without supervisor parameter) is visible.
P004 Password S
Setting range - 32768 … 32767
Factory setting { 0 }
Description Entry of the password from P005 to unlock all standard parameters. Safety
parameters are excluded from this.
Note The value which is entered here is lost when the control board / frequency inverter is
switched off. Password protection is active again.
P005 Change password S
Setting range -32768 … 32767
Factory setting { 0 }
Description Specification of a password to protect the setting values of standard parameters from
unauthorised changes. Password protection can be temporarily suspended via
P004 .
Safety parameters are excluded from this.
Note The password is generally suspended with setting {0} in P005 .