Nord Drivesystems SK 510P, Руководство с инструкциями по установке

Страница: 95 / 256

5 Parameter
BU 0600 en-3221 95
P059 6099 Ref. Pt. for speed S
Arrays [-01] = 6099 Ref. Pt. for speed [1] [-02] = 6099 Ref. Pt. for speed [2]
Setting range [-01] = 0 … 24000 rpm [-02] = 0 … 24000 rpm
PDO mapping [-01] = No [-02] = No
Data type [-01] = UNSIGNED 32 Bit [-02] = UNSIGNED 32 Bit
Factory setting [-01] = { 30 } [-02] = { 30 }
Description
[-01] =
DS402 Object 6099h:
Setpoint speed for
reference run to the limit
switch.
[-02] =
DS42 object 6099h: Setppoint speed
for reference run to the limit switch
P060 609A Ref.pt.f.accel. S
Setting range 0 … 2147483647 rpm/s
Factory setting { 750 }
PDO mapping No
Data type UNSIGNED 32 Bit
Description DS402 object 609Ah: Acceleration and braking deceleration in “Homing” operating
mode
P061 607C Ref.pt.f.offs. S
Setting range -2147483,648 … 2147483,647 rev
Factory setting { 0 }
PDO mapping No
Data type INTEGER 32 Bit
Description DS402 object 607Ch: States the difference between the zero position of the
application and the reference point of the machine.
Information
If the mains voltage is not connected (X1) the following parameter shows the value 0 and not the
actual correct operating value.
P062 606B & 606C & 6069 Velocity actual ! S
Display range -2147483.648 … 2147483647 rpm
Arrays [-01] = 606B Actual speed after ramp
[-02] = 606C Actual speed
[-03] = 6069 Actual encoder speed.
Factory setting All { 0 }
PDO mapping [-01] = No
[-02] = TxPDO
[-03] = No
Data type All INTEGER 32 Bit
Description [-01] = DS42 object 606Bh: Present actual speed in “Profile Velocity” operating mode.
[-02] =
DS42 object 606Ch: Actual speed after the ramp function in “Profile Velocity”
operating mode.
[-03] = DS42 object 6069h: Actual encoder speed in “Profile Velocity” operating mode.