Nord Drivesystems SK 510P, Руководство с инструкциями по установке

Страница: 212 / 256

NORDAC PRO (SK 500P) – Manual with installation instructions
212 BU 0600 en-3221
E016 16.1 Magn. current watch Required exciting current not achieved at moment of switch-
on.
• Check connections and cables on both sides
• Check the motor
Further notes:
• Check ( P539 )
• Check motor data ( P201 … P209 )
E016 16.2 Change phase direct. The motor phase sequence (U – V – W) has been changed
during operation (enable).
Further notes:
• Check parameter values in ( P583 )
• Has parameter set ( P100 ) been switched over?
E017 17.0 Change assembly grp. The customer unit (SK CU5-…) is not recognised by the
frequency inverter.
• Check the fastening of the customer unit / contacts
• EMC faults
Check cable shielding and earthing terminals of electrical
components.
E018 18.0 Safety circuit The Safe Pulse Block safety circuit has triggered during
release.
E018 18.5 Safety SS1 The parameterised trigger time ( P423 ) of the SS1-t
functionality has expired. STO is triggered as the inverter
still sends output pulses.
This error cannot be acknowledged. Restart the frequency
inverter (Power Off

120 s

Power On).
E018 18.6 Safety system Safety function error: This error cannot be acknowledged.
E019 19.0 Parameter ident. Automatic identification of the connected motor has failed.
• Check connections and cables on both sides
• Check the motor
Further notes:
• Check motor data ( P201 … P209 )
E019 19.1 Rotor position Incorrect result for motor position identification by test signal
method.
E019 19.2 Rotor pos. North/South Incorrect result for motor position identification by test signal
method
E022 --- Reserved PLC error message

see supplementary manual BU 0550
E023 --- Reserved PLC error message

see supplementary manual BU 0550
E024 --- Reserved PLC error message

see supplementary manual BU 0550
E025 --- Reserved POSICON

error message see supplementary manual BU
0610
E026 --- microSD card error MicroSD card data cannot be read.
• Repeat data transfer.
• Check data format (.nsdx).
• Use original microSD card (Part No.: 275292200).
E090 90.0 System error Unknown error code from sub system. The FI has received
an error code from an external unknown module. FI update
required. The new, extended error code can be read from
P700 [-04] . This allows the error to be distinguished.
• Restart device
E091 91.0 Update error Update failed