Nord Drivesystems SK 510P, Руководство с инструкциями по установке

Страница: 133 / 256

5 Parameter
BU 0600 en-3221 133
P404 Analog input filter S
Setting range 1 ... 400 ms
Arrays [-01] = Analog input 1 Analogue input 1 (AI1) integrated into the FI
[-02] = Analog input 2 Analogue input 2 (AI2) integrated into the FI
[-03] = Reserve
[-04] = Reserve
[-05] = Clock input 1
Scope of application [-01] … [-02] SK 500P and higher
[-03] … [-05] SK 530P and higher
Factory setting All { 100 }
Description Adjustable digital low-pass filter for the analogue signal. Interference peaks are
hidden, the response time is extended.
P405 V/I Analog S
Setting range 0 … 1
Arrays [-01] = Analog input 1 Analog input 1 (AI1) integrated into the FI
[-02] = Analog input 2 Analog input 2 (AI2) integrated into the FI
[-03] = Reserve
Factory setting { 0 }
Description Selection of the type of analogue signal.
Setting values
Value Function Description
0 Voltage A voltage signal is present at the analogue input.
1 Current A current signal is present at the analogue input.
P410 Min. freq. aux. setpoint P
Setting range -400.0 ... 400.0 Hz
Factory setting { 0.0 }
Description "
Minimum frequency auxiliary setpoints
". The minimum frequency that can act on the
setpoint via the auxiliary setpoints. Auxiliary setpoints are all frequencies that are
additionally delivered for further functions in the FI:
• Actual frequency PID
• Frequency addition
• Frequency subtraction
• Auxiliary setpoints via BUS
• Process controller
• Min. frequency via analogue setpoint (potentiometer)