Nord Drivesystems SK 510P, Руководство с инструкциями по установке

Страница: 10 / 256

NORDAC PRO (SK 500P) – Manual with installation instructions
10 BU 0600 en-3221
1.1 Device characteristics
The NORDAC PRO series is available in various versions. The following gives an overview of the
essential characteristics of the particular versions.
Characteristic SK … 500P/510P 530P 550P
Additional information
Operating manual BU 0600
Legend
x = Present - = Not present O = Optionally available
Sensorless current vector control
(high starting torque and precise
control of motor speed)
x x x
Asynchronous motor operation x x x
Operation of PMSM synchronous
motors
(Permanent Magnet Synchronous
Motor)
x x X
Operation permissible on network
types: TN, TT, IT
1)
x x x (Chap. 2.5.3.2)
DC coupling / Link voltage coupling x x x (Chap. 2.5.3.5)
Brake management for mechanical
holding brake
x x x (Chap. 2.5.3.1)
Brake chopper (braking resistor
optional)
x x x (Chap. 2.5.3.4)
Integrated EMC mains filter for
Class A1 / Category C2 limits
x x x (Chap. 8.3)
Can be mounted next to each other
without additional spacing
x x x (Chap. 2)
Extensive monitoring functions x x x (Chap. 7)
Status LEDs (FI / Bus) x / x x / x x / x (Chap. 6.1)
Status LEDs ((Industrial Ethernet) - - x

BU 0620
Stator resistance measurement x x x
(Chap. 5.1.4), P220
Automatic optimisation of precise
motor data
x x x
Internal 24 V power supply unit to
supply the control board
x x x
2)
An additional power supply
is required for the bus
communication.