Nord Drivesystems SK 510P, Руководство с инструкциями по установке

Страница: 78 / 256

NORDAC PRO (SK 500P) – Manual with installation instructions
78 BU 0600 en-3221
Menu group No. Master function
Operating displays (P0--) Display of parameters and operational values
DS402 parameter (P0--) Parameter for DS402 drive profile
Basic parameters (P1--) Basic device settings such as behaviour when switching on/off
Motor data (P2--) Electrical settings for the motor (motor current or starting voltage)
Control parameters (P3--) Setting for current and speed controls as well as encoder settings
(incremental encoders)
Settings for the integrated PLC (Details in

BU0550 )
Control terminals (P4--) Assignment of functions for the inputs and outputs
Additional
parameters (P5--)
Primarily monitoring functions and other parameters
Positioning (P6--) Setting of the positioning function (details

BU0610 )
Information (P7--) Display of operating values and status messages
Bus parameters (P8--) Parameters for Industrial Ethernet (Details in

BU0620 )
Information
Factory setting P523
The factory settings of the entire parameter set can be loaded at any time using parameter P523 . For
example, this can be useful during commissioning if it is not known which device parameters have
been previously changed and could have an unexpected influence on the operating behaviour of the
drive.
The restoration of the factory settings ( P523 ) normally affects all parameters. This means that all
motor data must subsequently be checked or reconfigured. However, parameter P523 also provides a
facility for excluding the motor data or the parameters relating to bus communication when the factory
settings are restored.
It is advisable to back up the present settings of the frequency inverter beforehand.