Nord Drivesystems SK 510P, Руководство с инструкциями по установке

Страница: 68 / 256

NORDAC PRO (SK 500P) – Manual with installation instructions
68 BU 0600 en-3221
3~ Mot
IEC 56
IM B3
cos j 0.74
cosj 0.74
IP55 Red Terminal 16 Th.Cl.F
EN60034
60 Hz 460 V Y
5.2 A
2.5 kW
1765 rpm
1440 rpm
P206
P201
P204
P203 P202
P200
9.0 / 5.2 A
50 Hz
2.2 kW
P207
P200 Motor list:
0 = No change 8 = 0.37kW 400V
1 = No motor 9 = 0.50PS 460V
2 = 0.25kW 230V 10 = 0.55kW 230V
3 = 0.33PS 230V 11 = 0.75PS 230V
4 = 0.25kW 400V 12 = 0.55kW 400V
5 = 0.33PS 460V 13 = 0.75PS 460V
6 = 0.37kW 230V 14 = 0.75kW 230V
7 = 0.50PS 230V ....
230 / 400 V D/ Y
Figure 6: Motor type plate
RECOMMENDATION: For correct operation of the drive unit, it is necessary to input the motor
data (name plate) as precisely as possible. In particular, automatic stator
resistance measurement using parameter
P220 is recommended.
To automatically determine the stator resistance, P220 = 1 must be set
and confirmed by pressing "ENTER". The value calculated for the line
resistance (depending on
P207 ) will be saved in P208 .
Motor data for IE1 / IE2 motors are provided via the NORDCON software. With the aid of the "Import
motor parameter" function (also refer to the NORDCON software manual
BU 0000 ), the required data
set can be selected and imported into the frequency inverter.