Nord Drivesystems SK 510P, Руководство с инструкциями по установке

Страница: 174 / 256

NORDAC PRO (SK 500P) – Manual with installation instructions
174 BU 0600 en-3221
Information
The input functions {10}, {11}, {13} to {16}, {53} to {57} and {58} do not function with the following
parameter
P543 without connection of a mains voltage (X1).
P543 Bus actual value S P
Setting range 0 … 57
Arrays [-01] = Actual bus value 1 [-02] = Actual bus value 2 [-03] = Actual bus value 3
[-04] = Actual bus value 4 [-05] = Actual bus value 5
Factory setting [-01] = { 1 } [-02] = { 4 } [-03] = { 9 } [-04] = { 0 } [-05] = { 0 }
Description Setting of the return values for bus control.
Setting values
Value / Meaning
0 Off 18 Value analog input 2
1 Actual frequency 19 Setpoint frequency master value P503
2 Actual speed
20
Setpoint master value after ramp,
“Setpoint master
value after ramp”
3 Current
4 Torque current ( 100 % = P112 )
21
Act. freq. w/o slip,
“Master value, actual frequency
without slip”
5 State of digital-IO
1)
6, 7 Reserved POSICON 22 Speed encoder
8 Set point frequency 23 Actual frequency with slip,
"Actual frequency with slip"
9 Error code
24
Master value, actual freq. with slip,
“Master value,
actual frequency with slip”
10,
11 Reserved POSICON
53 Actual value 1 PLC
12 BusIO Out Bits 0-7 … …
13 57 Actual value 5 PLC
… Reserved POSICON 58 Clock input 1
16
17 Value analog input 1
1) Digital input assignments:
Bit 0 (FI): DI 1 Bit 4 (FI): DI 5 Bit 8 (FI): AI 2 Bit 12 (FI): K1
Bit 1 (FI): DI 2 Bit 5 (FI): DI 6 Bit 9 (CU5): DI 2 Bit 13 (FI): K2
Bit 2 (FI): DI 3 Bit 6 (CU5): DI 1 Bit 10 (CU5): DI 3 Bit 14 (FI): DO 1
Bit 3 (FI): DI 4 Bit 7 (FI): AI 1 Bit 11 (CU5): DI 4 Bit 15 (FI): DO 2