Leibinger JET3, Руководство по эксплуатации

Страница: 365 / 406

Group 10 Setting-up/Maintenance Page 363
JET3 Series Release 2.02
10.1.2 TAG-reader
The TAG-reader of the Leibinger Printer printer guarantees a faultless function with
regard to the correct usage of ink and solvent.
The TAG-reader makes sure that only ink and solvent is used that is approved by
LEIBINGER.
With each refill the TAG of the ink or solvent bottle is checked for a valid TAG. If no valid
TAG is activated during the refill the printer will shut down to stand-by mode. Each TAG
can be activated only once.
Information
A TAG is electronically readable label which holds coded information. The
information is readable with TAG reader. The coded information is read out
wireless by radio.
Figure 186
1 – Reservoir tank „Ink“ 4 – Refilling bottle
2 – Reservoir tank „Solvent“ 5 – TAG area on the refill bottle
3 – TAG reader
10.1.2.1 Execution of the TAG-activation and refilling
Attention
The reservoir tanks mustn’t be refil led without respective messages from the
printer.
A too early refilling bears the risk of overfilling and spillage of ink or solvent!
1
2
3
4
5