Leibinger JET3, Руководство по эксплуатации

Страница: 251 / 406

Group 8 Job Editor Page 249
JET3 Series Release 2.02
Example In this example lengths specifications are printed on a cable (for details see
<Meter-Go-function>). In addition the word
Leibinger shall be printed
together with each third printout. See Picture 1 for details.
Picture 1 – Example cable print: the Leibinger logo together with each
third meter printout
The printout of the length
specifications are controlled by the
PrintGo signals. The printout of the
Leibinger logo is controlled by the
value of the counter that is assigned to
the
Leibinger text object.
Picture 2 shows the timing diagram.
For this print job are several settings
required.
Picture 2 – Timing diagram for
the periodically
repeating object
Settings for the PrintGo parameters
The PrintGo parameters are the same
for all objects printed. The PrintGo
signals (from the external measuring
system) and the StrokeGo signals
(from the external encoder) are used
to control the printout.
Relevant settings are marked in
Picture 3 .
Picture 3 – PrintGo settings for all
printed objects