Leibinger JET3, Руководство по эксплуатации

Страница: 357 / 406

Group 8 Job Editor Page 355
JET3 Series Release 2.02
8.8.1 Carry out replacements
Proceeding:
Example 1:
The default month specifications of a date object
(1 = 01; 2 = 02, … 7 = 07, etc.)
should be replaced by short names (1 = JAN, 2=FEBR ... 7=JUL….).
 Select the date object in the editing window of the job editor (2) .
 First select <Format> (1) from the menu bar and then <Object> (2) from the drop
down menu. Alternatively you can use the respective direct button (3) to open the
object settings dialog box.

The dialog box <Object Settings (Date/Time)> (5) opens.
 Select the <Replacements> tab (4)
 S elect the element type „Months“ (7) from the <Type> drop down list (6) .
 Each element in the <Name> list (9) has a corresponding input field in the
<Replacement> field list (8) . By setting the cursor into one of the input fields a virtual
keyboard opens (10) . Enter the required replacements for each element (1=JAN,
2=FEBR…..7=JUL….etc.) (11) .

Confirm each input with the <Enter> button (12) of the keyboard.
 Fill-in each required replacement in the <Replacements> field list (13) . Run through
the list by using the scroll buttons (14) .
 Confirm all changes and close the dialog box with the < OK> button (15) . Use the
<Cancel> button (16) to leave the dialog box without saving.
 All changes are displayed in the editing window of the <Job editor> (17) .
INFORMATION
You will find further information about the usage of the keyboard in chapter
6.4.2 Keyboard