Leibinger JET3, Руководство по эксплуатации

Страница: 338 / 406

Page 336 Job Editor Group 8
Release 2.02 JET3 Series
Tables for the example
Buffer position
1 2 3 4 5 6
Shifting
direction
Data Nr
Display buffer
X Y Y Z Z Z
1
Input buffer 1 1 2
Display buffer X Y Y Z Z Z 3
Input buffer 1 a a 4
Display buffer
X Y Y Z Z Z
5
Input buffer 1 a b b 6
Display buffer X Y Y Z Z Z 7
Input buffer
1 a b 4
4 8
Display buffer X Y Y Z Z Z 9
Input buffer 1 a b 4 5 5 10
Display buffer X Y Y Z Z Z 11
Input buffer 1 a b 4 5 6 6 12
Display buffer 1 a b 4 5 6 13
Input buffer 14
Object 1 param. X 15
Display Object 1
1
16
Object 2 param. OS Y Y 17
Display Object 2 a b 18
Object 3 param. OS OS OS Z Z Z 19
Display Object 3 4 5 6 20
The following table shows the explanations for each step and setting.
No. Explanation
1 Before the first data are received the set wildcards represent the first
display buffer content. This would also be the first print-out as soon as
a PrintGo signal will be received.
2 The character string 1ab456 is sent to the printer starting with the
character 1 .
3, 5, 7, 9, 11 The display buffer remains the same because the input buffer is not
filled up completely.
4, 6, 8, 10 The characters a , b , 4 and 5 are sent.
12
The character 6 is sent. With that character the input buffer is
completely filled.
13 With the input buffer filled up completely the content is transferred to
the display buffer.
14 The input buffer is emptied after the transfer in the last step.
This state can also be set with the <Deleting ExternText
memory>command.
15 Parameters object 1: 1 wildcard ( X ) and 0 offset
16 Display content for object 1: the first character of the display buffer.
17 Parameters object 2: 2 wildcards ( YY ) and 1 offset ( OS )
18 Display content for object 1: the second and the third character of the
display buffer
19 Parameters object 3: 3 wildcards ( ZZZ ) and 3 offset ( OS )
20 Display content object 3: the fourth, fifth and sixth character of the
display buffer.