Leibinger JET3, Руководство по эксплуатации

Страница: 183 / 406

Group 8 Job Editor Page 181
JET3 Series Release 2.02
7.5.1 Test print
With the option <Test Print> a defined default job with set internal PrintGo-source is
loaded. This job can be used by the operator as basis to create a new job or to control
the print function of the Printer.
The default job is loaded as follows:
Figure 83 Test print (Load default job)
or
1 – Drop-down menu <Extra> 5 – <OK> button
2 – Option <Test Print> 6 – <Cancel> button
3 – Direct button (shortcut) <Testprint> 7 – <Job loaded> confirmation
4 – Confirmation prompt 8 – Loaded <Test Print>
 Click on the menu item <Extra> (1) and select the option <Test Print> (2) or click on
the accordant direct buttons (shortcut) (3) .

A confirmation prompt (4) , pops up
 Confirm by pressing the <OK> button (5) or cancel the process with the
<Cancel> button (6) .
 A message (7) , that the test print-job is loaded pops up.
 Confirm the message with the <OK> button (5) . The job is now loaded and ready for
to be printed.
ATTENTION
 For the <Test Print> job all signals are generated internally and no
sensor or encoder is required. Therefore, if the test print is loaded while
<print start> is activated, the Printer starts immediately with the printing
process.
 Caution! Ink escapes immediately from the print head
1
2
4
3
5 5
6
7
8