Leibinger JET3, Руководство по эксплуатации

Страница: 298 / 406

Page 296 Job Editor Group 8
Release 2.02 JET3 Series
The height of the printout of the selected bar code type is defined with the <Bar height>
(6) setting. The height is measured in dots. The Printer printer is able to print up to 32
dots in vertical direction. Therefore <Bar height> can be set to a value between 0 and
32.
Bar code type code 39 with
different <Bar height>
settings.
The height of the plain text
depends on the selected font.
In this example it is a 7x5 font.
Pushing the <Default Settings> button (8) will open the <Barcode Format Default
Settings> dialog box (10) . In this dialog box the default settings for the 3 preset <Styles>
can be adjusted. There is a tab for each <Style> (11-13) . All changes confirmed with the
<OK> button will be applied to the <Style> settings in the <Barcode format> dialog box.
The <Cancel> button will close the dialog box without changes.
For 2-D bar codes like the ECC200 code the <Barcode format> dialog box (14) offers
different options. For 2-D bar codes there are 3 <Styles> available (15) . With the styles
the number of printed dots which are used per 2-D code square is defined.
<1x1> <Style>: one square of the 2-D code is printed with 1 dot (16) .
<2x2> <Style>: one square of the 2-D code is printed with 4 dots (17) .
<3x3> <Style>: one square of the 2-D code is printed with 9 dots (18)