Leibinger JET3, Руководство по эксплуатации

Страница: 214 / 406

Page 212 Job Editor Group 8
Release 2.02 JET3 Series
2. Deletion of graphic elements:
(Example: On side of a rectangle and a complete line shall be deleted)
Proceeding:
 Start with the deletion of the line.
 Select the <Selection> tool (2) from the the <Function> drop-down menu (1) .

The selection frame is defined by two corner points (3) and (6) . Place the corner
points in a way that the selection frame covers the line to be deleted.
 The <Coordinates> indicator (4) displays the respective positions of the corner
points. The < Status bar for the current tool > (5) provides information for each
step.
 Select the <Delete> tool (8) from the <Edit> drop-down menu (7) .
 The line covered by the selection frame will be deleted.
 In the next step one side of the rectangle will be deleted.
 Select the < Selection > tool (2) from the < Function > drop-down menu (1) .
 Define the first corner point for the selection frame (11) . At this point the contour of
the rectangle will be interrupted. This point will be marked red.
 Define the second corner of the selection frame (12) . This point is positioned just
one dot below the first corner point. Actually this results not in a selection frame
but in a selection line.
 Select the <Delete> tool (8) from the <Edit> drop-down menu (7) .
 The part of the rectangle covered by the selection frame will be deleted.