Leibinger JET3, Руководство по эксплуатации

Страница: 213 / 406

Group 8 Job Editor Page 211
JET3 Series Release 2.02
7.5.6.8 Create and process graphic elements
1. Creation of graphic elements:
Example: A rectangle shall be created
Proceeding:
 Select the <Rectangle> tool (2) from the the <Function> drop-down menu (1) .
 Click on the drawing area at the position of the first corner of the rectangle (3) .
 This point is marked red. The position is displayed by the <Coordinates>
indicator (4). In the <status bar for the current tool > (5) the next step is
displayed.

With a click on the position of the second corner of the rectangle (6) the rectangle
will be created.
Figure 102 Graphic editor (Create a bitmap)
1 – Drop-down menu <Function> 4 – <Coordinates> indicator
2 – <Rectangle> tool 5 – <Status bar for the current tool>
3 – First corner of the rectangle 6 – Second corner of the rectangle
1
3
5
2
4
6