Leibinger JET3, Руководство по эксплуатации

Страница: 253 / 406

Group 8 Job Editor Page 251
JET3 Series Release 2.02
„Leibinger logo group“
Text object for the Leibinger logo.
Picture 6 –
Printer job editor: Objects for the
„Leibinger“ logo printout
Counter object for the printout control of
the
Leibinger logo.
This counter is assigned to the text
object “Leibinger”.
It is displayed in green because it will
not be printed. When you select the
counter object you can see its ID in the
field below the x-y coordinates.
Counter parameters
Printout control of Leibinger logo
Picture 7 – Counter settings for the
Leibinger text object
1. The counter works with 1 digit and a
step width of 1; left-hand zeros are
not relevant.
2. The count will start at 1 and the end
value is 3. After reaching the end
value the counter will loop back to 0.
3. The current counter value is not
printed.
1. In the global settings of the text
object you can assign the counter for
the
Liebinger text object. Make sure
to set the correct ID.
2. The Leibinger logo shall be prin-ted
between two length specifi-cations.
Therefore the distance between the
printout of the length specifications
and the Leibinger logo has to be
500 mm. The position of an object
can be exactly specified in the job
editor. The x value equals the
number of strokes. The mm value of
one stroke can be found in the font
parameter menu. In this example
the stroke width is set to 0,271
mm/Stroke. This equals in ~1852
strokes for 500 mm.
Picture 8 – Settings for the
"Leibinger" text object
Picture 9 –
Use the scroll bar for switching
between the 2 "object groups"
within the editor
Open the “Global
settings” menu of
the selected object