Leibinger JET3, Руководство по эксплуатации

Страница: 287 / 406

Group 8 Job Editor Page 285
JET3 Series Release 2.02
8.5.4 Date change offset
With this function you can shift the date change to an earlier or later point in time.
Note: The shifting happens in hours- and minutes. The max. possible offset is +/- 23
hours and 59 minutes.
Figure 159 Date change offset tab
1 – <Date change parameter> tab 8 – Negative <Offset>
2 – <+/-> drop-down list 9 – Offset <Hour block>
3 – Arrow keys 10 – Offset <Minute block>
4 – Input field <Offset time> 11 – <Decrease>Offset
5 – <OK> Button 12 – <Increase>Offset
6 – <Cancel> Button 13 – Adjusted <Date change offset>
7 – Positive <Offset>
Proceeding:
 Select the <Date change Parameter> tab (1) .
 Select in the <+/-> drop-down list (2) the kind of offset. <+> stands for a positive
offset (7) . The date change is shifted to a later point in time. <-> stands for a
negative offset (8) . The date change is shifted to an earlier point in time.
 Select the hour (9) or the minute block (10) in the input field (4) for the <Date change
offset > (13) .
 The <Date change offset> is set with the two arrow keys (3) . The left arrow key will
decrease the <Offset> the right arrow key will increase the <Offset>.
 All settings are confirmed with the <OK> button (5) .
 With the <Cancel> button (6) the tab is closed without saving.
1
2
7
3
4
8
9 10
11 12
13
6
5